|
- Each carriage is provided with a central safety and movement control unit located at the end of the carriages and contains the following:
- Directional movement buttons.
- Safety stop/reset button.
- Control head LED status indicator.
- Amber warning light.
- Solid-state safety and control modules.
- Audible start movement signal.
- Controlled start and stop sequence.
|
- Welded structural steel wheel assembly with a maximum capacity of 16,000 lbs per single face rack assembly.
- Each wheel assembly is equipped with two wheels 6" in diameter with dual flanged guidance.
- Each wheel is equipped with two permanently lubricated & shielded radial ball bearings.
- Rails are designed with dual flange guidance made from solid 1018 steel with black oxide finish for rust protection.
- Rails can be installed either surface mounted or recessed 3/8" into the concrete floor.
- Easy accessibility for maintenance and service.
|
- Infrared photoelectric safety sweeps scan the full length of both sides of each carriage. The sweep will prevent or immediately stop movement if an obstruction is encountered or the beam is broken.
- Safety-stop push button.
- A warning horn sounds for the first 3 seconds of movement.
- Entire system is U.L. listed
|
